Any Demands please contact us feel free!
+86-18501750581
E-mail：davidchan@goonoo.hk
Skype：xiaochen8179
Toggle Navigation

Titanium alloy Grade 9 Ti-3Al-2.5V Wire

1. Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness.
2. Size: Φ1.0mm~Φ7mm;
Products Inquiry

Product Details

Titanium Alloy Grade9 Ti-3Al-2.5V alloy is an alpha alloy that is strengthened by cold working. The material exhibits good ductility and toughness. It is used in a wide range of tubular products from aircraft ducting to golf club shafts and bicycle frames. The alloy is available as wire, bar, sheet, seamless and welded tubing. ASME code approved.

 

Standard Specification: ASTM B863, ASME SB863, ASTM F136, ISO, DIN AWS A5.16 (ERTi-23)

 

Standard

Werkstoff No.

UNS

Titanium Alloy Grade9 Ti-3Al-2.5V

3.7195

R56320

 

Technical Data Sheet

Chemical Composition

Weight %

Ti

Al

V

C

Fe

N

O

H

Titanium Alloy Grade9 Ti-3Al-2.5V

Balance

2.5~3.5

2.0~3.0

0.08

0.25

0.03

0.15

0.015

 

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Alloy Grade9 Ti-3Al-2.5V

90

620

70

483

15

25

 

Related Products

Titanium Alloy Grade5 Ti-6Al-4V Wire

T Titanium Alloy Grade5 Ti-6Al-4V Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys. The alloy is castable and

Medical Titanium and Titanium alloy Wire

1. Titanium wire for Neurosurgery Implants Kirschner Wire  Specification (mm) Φ0.8mm, Φ1.0mm, Φ1.5mm; Φ2.0mm; Φ2.5mm; Φ3.0mm; Φ3.5mm; Φ4.0mm Length (mm) 1000~3000

Titanium and Titanium alloy Mesh

Weave Pattern: Plain weave, twill weave, dense weave;Titanium mesh performance:Corrosion resistance is betterPure titanium screen long service life, safe and reliable operation Titanium wire

Titanium alloy Grade 7 Ti-0.2Pd Wire

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, inclu