Titanium Sheet and Plate_SHANGHAI GOOLEE SCIENCE AND TECHNOLOGY DEVELOPMENT CORPORATION LIMITED

Commercial Pure Titanium Grade 1 Sheet and Plate

Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of dee

Commercial Pure Titanium Grade 2 Sheet and Plate

Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balanceof strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion res

Commercial Pure Titanium Grade 3 Sheet and Plate

Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength,moderate ductility, and ASME Code design allowable. The material is readily weldable. This material is very corrosion res

Commercial Pure Titanium Grade 4 Sheet and Plate

Titanium Alloy Grade 4 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable o

Titanium Alloy Grade5 Ti-6Al-4V Sheet and Plate

Titanium Alloy Grade5 Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. The alloy is castable and is ut

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials) Sheet and Plate

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interst

Titanium alloy Grade 7 Ti-0.2Pd Sheet and Plate

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, inclu

Titanium alloy Grade 9 Ti-3Al-2.5V Sheet and Plate

Titanium Ti3Al2.5V (grade 9) or more simply known as Ti-3-2.5 is commonly grouped with the commercially pure grades due to it's ability to be cold rolled. The strength of Ti3al2.5V (Ti-3-2.5) falls be

Titanium Alloy Grade 12 Ti-0.3Mo-0.8Ni Sheet and Plate

Titanium Grade 12 is similar to Grade 2 and Grade 3 except Grade 12 has the addition of Mo and Ni. These additions to Grade 12 offer a lower cost option than the Palladium bearing grades. Grade 12 has

Medical Commercial Pure Titanium mesh plate for skull

Specification (mm) Thickness (0.5~1.0)×Width200mm Length (mm) (1000mm~1200mm) Standards: GB/T13810-2017, ASTM F67, ISO5823-2, Titanium Grade Grade1, Grade2;