Listed in the following table are some of the common sizes produced for major aircraft companies. Sizes other than those shown can be produced depending on the quantity required. SEAMLESS TITANIUM TUBES FOR AMS 4944L GR.9
Outside Diameter |
Wall Thickness |
Outside Diameter |
Wall Thickness |
||
in (mm) |
in (mm) |
in (mm) |
in (mm) |
||
1/4 (6.4) |
0.016 |
0.41 |
3/4 (19.1) |
0.020 |
0.51 |
0.020 |
0.51 |
0.028 |
0.71 |
||
0.028 |
0.71 |
0.035 |
0.89 |
||
- |
- |
0.039 |
0.99 |
||
- |
- |
0.054 |
1.37 |
||
- |
- |
0.081 |
2.06 |
||
3/8 (9.5 |
0.019 |
0.48 |
7/8 (22.2) |
0.028 |
0.53 |
0.022 |
0.56 |
0.032 |
0.71 |
||
0.028 |
0.71 |
0.035 |
0.89 |
||
0.035 |
0.89 |
0.049 |
1.24 |
||
0.042 |
1.07 |
0.061 |
1.55 |
||
1/2 (12.7) |
0.023 |
0.58 |
1 (25.4) |
0.021 |
0.53 |
0.026 |
0.66 |
0.028 |
0.71 |
||
0.028 |
0.71 |
0.035 |
0.89 |
||
0.036 |
0.91 |
0.051 |
1.30 |
||
0.056 |
1.42 |
0.070 |
1.78 |
||
- |
- |
0.073 |
1.85 |
||
5/8 (15.9) |
0.023 |
0.58 |
11/4 (31.8) |
0.028 |
0.71 |
0.028 |
0.71 |
0.032 |
0.81 |
||
0.032 |
0.81 |
0.035 |
0.89 |
||
0.035 |
0.89 |
0.040 |
1.02 |
||
0.044 |
1.12 |
0.065 |
1.65 |
||
0.049 |
1.24 |
0.087 |
2.21 |
||
- |
- |
- |
1 1/2 (38.1) |
0.035 |
0.89 |
- |
- |
0.054 |
1.37 |
Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, inclu
Ti-6Al-4V ELI Alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low int
Titanium Alloy Grade5 Ti-6Al-4V Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys. The alloy is castable and is&nbs
Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength,moderate ductility, and ASME Code design allow ables. The material is readilyweld able. This material is very corros