Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength,
moderate ductility, and ASME Code design allow ables. The material is readily
weld able. This material is very corrosion resistant in highly oxidizing and
mildly reducing environments.
Standard: ASMESB338; ASTM B861; ASTM B862;AMS4942;AMS4945;AMS4944;AMS4943; GB/T3625;
Standard |
Werkstoff No. |
UNS |
Commercial Pure Titanium Grade3 |
3.7055 |
R50550 |
Technical Data Sheet
Chemical Composition |
||||||
Weight % |
Ti |
C |
Fe |
N |
O |
H |
Commercial Pure Titanium Grade3 |
Balance |
0.08 |
0.3 |
0.05 |
0.35 |
0.015 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Commercial Pure Titanium Grade3 |
64 |
450 |
55 |
380 |
18 |
30 |
Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, inclu
Ti-6Al-4V ELI Alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low int
Titanium Alloy Grade5 Ti-6Al-4V Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class,and is also the most common of all titanium alloys. The alloy is castable and is&nbs
Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balanceof strength and ductility. The material has good toughness and is readilyweldable. This material is very corrosion resistant
Customer service hotline:0086-18501750581
Service time:8:00 - 18:00