Any Demands please contact us feel free!
+86-18501750581
E-mail：davidchan@goonoo.hk
Skype：xiaochen8179
Toggle Navigation

Titanium Alloy Grade23 Ti-6Al-4VELI ( Extra low interstitials) Foil

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important.
Size: Thickness0.01mm~0.1mm×Width10mm~600mm×Coil mm;
Products Inquiry

Product Details

Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus beta class, and is also the most common of all titanium alloys. This modification incorporates extra low interstitials (ELI). The wrought material is used in applications where moderate strength, good strength to weight, and favorable corrosion properties are required. This alloy is commonly used in medical implants where strength is important.

Standard Specification:ASTM B265, ASME SB265, ASTM F136, ISO, AMS 4911;

Standard

Werkstoff No.

UNS

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

3.7165

R56407

 

Technical Data Sheet

Chemical Composition

Weight %

Ti

Al

V

C

Fe

N

O

H

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

Balance

5.5~6.5

3.5~4.5

0.08

0.25

0.03

0.13

0.0125

 

Typical Mechanical Properties (Tensile Requirements)

Material

Tensile Strength, min

Yield Strength (0.2% Offset) min or range

Elongation in 4D,min%

Reduction of Area

Min %

ksi

MPa

ksi

MPa

Titanium Alloy Grade23 Ti-6Al-4VELI (Extra low interstitials)

120

828

110

759

7.5H,6.0I

25

H: For Product section or wall thickness values＜1.0 in.;

I: For product section or wall thickness values≥1.0 in.; 

Related Products

Ti 15V-3Cr-3Sn-3Al (Ti 15333)

Titanium alloys are divided into alpha alloys, near-alpha alloys, alpha and beta alloys, and beta alloys. Grade Ti 15V 3Cr 3Al 3Sn alloy is a beta alloy that can be strip-rolled and heat-treated. It

Titanium Alloy Grade7 Ti-0.2Pd Foil

Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, incl

Titanium Alloy Grade 12 Ti-0.3Mo-0.8Ni Foil

Titanium Grade 12 is similar to Grade 2 and Grade 3 except Grade 12 has the addition of Mo and Ni. These additions to Grade 12 offer a lower cost option than the Palladium bearing grades. Grade 12 ha

Titanium Alloy Grade5 Ti-6Al-4V Foil

Titanium Alloy Grade5 Ti-6Al-4V alloy is the most widely used titanium alloy of the alpha-plus-beta class, and is also the most common of all titanium alloys. The alloy is castable and is u