Titanium Alloy Grade 7 with 0.1% palladium is similar to Grade 2, but with improved resistance to general and localized crevice corrosion in a wide range of reducing acid environments, including chlorides, and where low pH and high temperatures above 180ºF (83ºC) to 500ºF (260ºC) are prevalent.
Standard Specification: ASTM B348, ASME SB348, ISO, DINAWS A5.16 (ERTi-7);
Standard |
Werkstoff No. |
UNS |
Titanium Alloy Grade7 Ti-0.2Pd |
3.7235 |
R52400 |
Technical Data Sheet
Chemical Composition |
|||||||
Weight % |
Ti |
Pd |
C |
Fe |
N |
O |
H |
Titanium Alloy Grade7 Ti-0.2Pd |
Balance |
0.12~0.25 |
0.08 |
0.3 |
0.03 |
0.25 |
0.015 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Titanium Alloy Grade7 Ti-0.2Pd |
50 |
345 |
40 |
275 |
20 |
30 |
Titanium Alloy Grade 3 is “unalloyed” titanium offering improved strength, moderate ductility, and ASME Code design allowables. The material is readily weldable. This material is very corrosion resis
Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion resist
Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of de
1. TitaniumRodfor Neurosurgery Implants KirschnerRod Specification (mm) Φ7mm~Φ230mm Length (mm) 1000~3000
Customer service hotline:0086-18501750581
Service time:8:00 - 18:00