Titanium Alloy Grade 1 is “unalloyed” titanium offering optimum ductility and cold formability. The material has high impact toughness and is readily weldable. The material is capable of deep drawing.
Standard Specification: ASTM B348, ASME SB348, ASTM F67, ISO, DINAMS-T-9046B CP4
AMS 4940 MIL-T-9046J CP4
Standard |
Werkstoff No. |
UNS |
Commercial Pure Titanium Grade1 |
3.7025 |
R50250 |
Technical Data Sheet
Chemical Composition |
||||||
Weight % |
Ti |
C |
Fe |
N |
O |
H |
Titanium CP Grade 1 |
Balance |
0.08 |
0.02 |
0.03 |
0.15 |
0.015 |
Typical Mechanical Properties (Tensile Requirements)
Material |
Tensile Strength, min |
Yield Strength (0.2% Offset) min or range |
Elongation in 4D,min% |
Reduction of Area Min % |
||
ksi |
MPa |
ksi |
MPa |
|||
Titanium Grade 1 |
35 |
240 |
20 |
138 |
24 |
30 |
Titanium Alloy Grade 2 is “unalloyed” titanium offering an excellent balance of strength and ductility. The material has good toughness and is readily weldable. This material is very corrosion resist
1. TitaniumRodfor Neurosurgery Implants KirschnerRod Specification (mm) Φ7mm~Φ230mm Length (mm) 1000~3000
Standard Specification: ASTM B348, ASME SB348, ISO, DINAWS A5.16 (ERTi-36); Standard Werkstoff No. UNS Titanium Al
Titanium Alloy Grade 12 is lightly alloyed near-alpha alloy offering improved strength at elevated temperatures and optimum ASME Code design allowables. The material is readily weldable, and